|
|
HS1
Relay |
- Slim
size (width 5mm)
- High breakdowm voltage 4kV
(between coil and contacts)
- Surge voltage up to 6kV (between coil and contacts)
- Clearance/creepage
distance: 8mm
- Meeting
VDE0700,0631 reinforce insulation
- High
sensitive: 170mW
- Sockets
available
- 1
Form A and 1 Form C configurations
- Environmental
friendly product (RoHs compliant)
- Outline
Dimensions: (28.0X5.0X15.0)mm
|
1. Contact Data
Contact Arrangement |
1A |
1C |
Contact
Resistance |
100m ohm (at 1A 6VDC ) Gold planted: 30m ohm (at 1A 6VDC ) |
Contact Material |
AgNi, AgSnO2 |
Contact Rating (Res. load) |
6A 250VAC / 30VDC |
Max. Switching Voltage |
400VAC / 125VDC |
Max. Switching Current |
6A |
Max. Switching Power |
1,500VA / 180W |
Mechanical Endurance |
1 X 107 ops |
Electrical Endurance |
6X104ops (at 85¡É) |
(NO)3 X 104ops (at 85¡É) (NC)1 X 104ops (at 85¡É) |
2. Characteristics
Insulation
Resistance |
100M¥Ø (at 500VDC) |
Dielectric
Strength |
Between Coil& Contacts |
4,000VAC 1min |
Between Open Contacts |
1,000VAC 1min |
Operate Time (at nomi. volt.) |
8ms max. |
Release Time (at nomi. volt.) |
4ms max. |
Shock
Resistance |
Functional |
49m/s2 |
Destructive |
980m/s2 |
Vibration
Resistance |
10Hz to 55Hz,
1mm DA |
Humidity |
5% to 85% RH |
Ambient temperature |
-40¡É to 85¡É |
Termination |
PCB |
Unit Weight |
Approx. 5.4g |
Construction |
Wash tight, Flux proofed |
Notes: 1) The data shown above are initial
values.
2) Please find coil temperature curve in the
characteristic curves below.
3) When install 1 Form C type of HS1, please
do not make the relay side with 5mm width down.
3. Coil
Coil Power |
5 to 24VDC: 170mW
48VDC,60VDC: 210mW |
4. Coil Data
Nominal
Voltage
VDC |
Pick-up
Voltage
VDC |
Drop-out
Voltage
VDC |
Max. Allowable
Voltage VDC |
Coil Resistance
¥Ø |
5 |
3.75 |
0.25 |
7.5 |
147X(1±10%) |
6 |
4.50 |
0.30 |
9.0 |
212X(1±10%) |
9 |
6.75 |
0.45 |
13.5 |
476X(1±10%) |
12 |
9.00 |
0.60 |
18 |
848X(1±10%) |
18 |
13.5 |
0.90 |
27 |
1,906X(1±15%) |
24 |
18.0 |
1.20 |
36 |
3,390X(1±15%) |
48 |
36.0 |
2.40 |
72 |
10,600X(1±15%) |
60 |
45.0 |
3.00 |
90 |
16,600X(1±15%) |
Notes: When require pick-up voltage=70%
nominal voltage,special order allowed.
5. Safety Approval Ratings
UL&CUL |
6A 30VDC
Resistive: 6A 277VAC
Pilot duty: R300 B300 |
VDE |
6A 30VDC / 6A 250VAC |
Notes: Only some typical ratings are listed above.
If more details are required, please contact us.
6. Ordering Information
7. Outline Dimensions, Wiring diagram and pc board layout Unit:mm
Remark : 1) In case of no tolerance shown inoutline dimension: outline dimension¡Â1mm,
tolerance should be±0.2mm;outline dimension>1mm and ¡Â5mm,tolerance should be ±0.3mm£»
outline dimension>5mm ,tolerance should be± 0.4mm.
2) The tolerance without indicating for PCB layouts is always ±0.1mm. 8. Charateristic Curves
Disclaimer
This
datasheet is for the customers' reference. All the
specifications are subject to change
without notice.
We
could not evaluate all the performance and all the parameters for everypossible application.
Thus the user should be in a right positionto choose the suitable product for their for their own application.
If there isany query, please contact HANDOUK for the technicalservice.
However, it is the user¡¯s responsibility to determine which productshould be used only. |